 |
Air Powered Front Mount 5C Dead Length Collet Chucks No Draw-Tube or Air Feed Tubes Required: for Lathes, Rotary Tables and Grinders: Series ATL206-5C
|
 |
||||
|
Collet Chuck |
ATL206-5C | Specifications | ATL206-5C | |
|---|---|---|---|---|
|
Collet Chuck Order No. with Mount:
ATL206-5C Straight Recess Mount Type A Mount ATL206-5CA4 ATL206-5CA5 ATL206-5CA6 ATL206-5CA8 Type D Mount ATL206-5CD3 ATL206-5CD4 ATL206-5CD5 ATL206-5CD6 ATL206-5CD8 Other Mounts ATL206-5C43-21⁄4-8 ATL206-5C44-4°-Taper ATL206-5C45-23⁄16-10 ATL206-5C46-23⁄8-6 Collet Chuck Supplied with: • 2 Filter Bars • 2 Air Hoses • 1 Fixing Bracket for Hoses • 1 5C Collet Wrench • 1 Hex Key • Mounting Bolts • Users Manual |
A | 168mm (6.61") | Screw Hole Dia | 9mm (0.35") x 4 |
| B | 130mm (5.12") | Collet Type | 5C Collets | |
| C | 26mm (1.02") | Max. RPM | 4000 | |
| D | 5mm (0.20") | Sleeve Stroke | 4mm (0.16") | |
| E | 100mm (3.94") | Air Pressure | 3-8 kg/cm2 (42-114 psi) | |
| F | 55mm (2.17") | Through Hole Dia | 26mm (1.06") | |
| G | 106mm (4.17") | Chuck Weight | 10kg (22lbs) | |
| H | 147mm (5.79") | Grip Force | 10,500 lbs @ 100 PSI | |
|
NOTE: “E” shown is for model ATL206-5C Collet Chuck with no
mounting plate.
Add 3/4" to the “E” dimension for mounting plate. This will vary slightly depending on the mounting required. If an exact “E” dimension is required, consult factory. OPTIONS: Order No: LEV100 Lever Control Package: (Includes: Lever Control, Line Filter, Lubricator and regulator.) |
||||