QCS Workholding LLC
10635 Tower Oaks Blvd.  Ste. E
Houston  TX   77070
Toll Free (888) 869-2424    Local (281) 664-1020   Fax  (281) 664-1026
mailto:workholding@hotmail.com

 

AtlasChucks.com

An Online Pratt Burnerd/Atlas Chuck Distributor

Home Contact
Us
Manual
chucks
Power
Chucks
Rotary Hydraulic
Cylinders
Collet
Chucks
Facebook
Air Powered Front Mount 16C Dead Length Collet Chucks 

No Draw-Tube or Air Feed Tubes Required: for Lathes, Rotary Tables and Grinders: Series ATL207-16C

  • No Hydraulic System Required
  • No Draw Tube or Air Feed Tubes Restricting Spindle Bore
  • No Rear Cylinders and Cylinder Adapters
  • Low Cost
  • Easily Convert any Lathe or Grinder into a Production Machine
  • Ideal for Rotary Table Applications
  • Change from Collet Chuck to Standard Chuck Quick and Easy
  • High Speed 4000 RPM
  • High Accuracy Less Than .001 TIR
  • Repeats on Duplicate Parts Plus Minus .00015
  • Dead Length Design
  • For Best Accuracy Use High Quality Crawford Collets
  • Lever or Foot Pedal Actuated
  • Low Maintenance with Oil Mist Lubrication System
  • High Resistance to Coolant and Chip Penetration
  • Uses 5C Collets, Range 1/64" (.5mm) to 1-1/8" (27mm)
  • Available in A, D, L, 4 Degree, Threaded and Straight Recess Mounting
  Collet Chuck ATL207-16C Specifications ATL207-16C
Collet Chuck Order No. with Mount:
ATL207-16CAP

Straight Recess Mount
Type A Mount
ATL207-16CA5
ATL207-16CA6
ATL207-16CA8

Type D Mount
ATL207-16CD4
ATL207-16CD5
ATL207-16CD6
ATL207-16CD8

Other Mounts
ATL207-16C44-4 Taper
ATL207-16C45-23⁄16-10
ATL207-16C46-23⁄8-6

Collet Chuck Supplied with:
2 Filter Bars
2 Air Hoses
1 Fixing Bracket for Hoses
1 16C Collet Wrench
1 Hex Key
Mounting Bolts
Users Manual
 
A 195mm (7.67") Screw Hole Dia 9mm (0.35") x 3
B 160mm (6.30") Collet Type 16C Collets
C 40mm (1.57") Max. RPM 3500
D 5mm (0.20") Sleeve Stroke 4mm (0.16")
E 112mm (4.41") Air Pressure 3-8 kg/cm2 (42-114 psi)
F 63mm (2.48") Through Hole Dia 40mm (1.57")
G 133mm (5.23") Chuck Weight 14kg (30.8lbs)
H 176mm (6.93") Grip Force 12,300 lbs @ 100 PSI
NOTE: E shown is for model ATL207-16C Collet Chuck with no mounting plate.
Add 3/4" to the E dimension for mounting plate. This will vary slightly depending on the mounting required. If an exact E dimension is required, consult factory.
OPTIONS: Order No: LEV100 Lever Control Package: (Includes: Lever Control, Line Filter, Lubricator and regulator.)
Order No: FOT200 Foot Pedal Control Package: (Includes: Foot Pedal, Line Filter, Lubricator and regulator.)


Call, Fax Or Email For Current Pricing
Toll Free (888) 869-2424   Fax (281) 664-1026
Email  
workholding@hotmail.copm

Sitemap


Copyright 2016 QCS Workholding LLC
All Rights Reserved